Answer
Jul 05, 2022 - 10:18 AM
Instructions for Neenah Image Clip Laser Light
Mirror Print
Temp: 375°F
Time: 30 seconds
Pressure: Heavy
Peel: Hot
Instructions for Printing:
Print the image mirrored onto the Red Imaging Sheet
Print on standard paper setting. (if you don't get a good quality image or toner fusing increase to a heavier paper weight.
Printing Preparations:
Be sure your print substrate is clean & wrinkle free (lint roll if needed)
Transferring:
Step 1: Place a foam pad on the heat press. Press the printed imaged sheet to the green backed transfer paper and heat press for 20 seconds at 210°F with a heavy pressure.If you are not using a foam pad on your heat press, bring the pressure down to light. After 20 seconds under the heat press separate the 2 papers with a smooth and even motion. Be sure to do this while its still hot.
Step 2: Remove the foam pad from your heat press machine and place the substrate/t-shirt onto the heat press. Press the printed image face down on to the apparel / substrate. Press for 30 seconds at 375°F with a heavy pressure. After the 30 seconds peel the paper off while it's still hot. Be sure to do this in a smooth even motion.
Tip: Right after you have completed the transfer, give the garment a slight stretch while still warm to improve the final feel of the print.
Mirror Print
Temp: 375°F
Time: 30 seconds
Pressure: Heavy
Peel: Hot
Instructions for Printing:
Print the image mirrored onto the Red Imaging Sheet
Print on standard paper setting. (if you don't get a good quality image or toner fusing increase to a heavier paper weight.
Printing Preparations:
Be sure your print substrate is clean & wrinkle free (lint roll if needed)
Transferring:
Step 1: Place a foam pad on the heat press. Press the printed imaged sheet to the green backed transfer paper and heat press for 20 seconds at 210°F with a heavy pressure.If you are not using a foam pad on your heat press, bring the pressure down to light. After 20 seconds under the heat press separate the 2 papers with a smooth and even motion. Be sure to do this while its still hot.
Step 2: Remove the foam pad from your heat press machine and place the substrate/t-shirt onto the heat press. Press the printed image face down on to the apparel / substrate. Press for 30 seconds at 375°F with a heavy pressure. After the 30 seconds peel the paper off while it's still hot. Be sure to do this in a smooth even motion.
Tip: Right after you have completed the transfer, give the garment a slight stretch while still warm to improve the final feel of the print.
